Upgrade to premium membership
You have reached the maximum number of players that you can follow. Upgrade now to follow more.
These are freqeuently asked questions for the Squash Levels site. Please look through these before contacting us as there is a good chance your question is already covered. If not, then please get in touch and we can add your question to this list. Click on the question to reveal the answer.
Please also take a look through the About this site page as that covers a lot of topics that may also help.
Your feed is personal to you and contains a combination of the information you have asked to see and what we think you would like to see. You can configure some of this via your Control Centre. As we continue to develop the site we'll continue to add to your feed so the following list is more of a guide than a comprehensive list though we'll try to keep it up-to-date:
If there is anything else you'd like to see in your feed, do let us know.
A community is a group of players who have something in common that brings them together. The most obvious examples are the auto-generated communities for club and counties/reqions but there are also other community types ranging from your teammates, the players you follow, a group of players that you define, a junior squad, PSA players, etc., etc.
The great thing about the auto-generated communities is that if you are eligible to be in one, then you probably already are! I.e. if you play for or in a club then you will automatically be in that club's community and also the county/regional community that the club is in. You might also be in the federation community above that!
You can access your communities either from the links in your footer (under MY COMMUNITIES) or from the community tab in your feed. Each of your communities will have its own page.
Communities give you a lot of cool information specific to your community:
A great note about the Youtube links is that they support Youtube live streaming so, if you have a Youtube account, you can pop your phone on the balcony or behind the glass and live steam your matches for the rest of your community to see!
For the admins - you are the ones that can post! Once you have claimed your communithy (just get in touch wth us!) we can set you up as an admin and then you will see a FaceBook-like posting block at the top of your community page. Just click on that to get posting! Note you have a few controls available by clicking on the cog:
Note that your community members will always see a notification in their top menu for your post and they will see the post itself in their feed if not disabled via the controls above.
Also note that only registered users can see your posts or visit your community page so do please encourage everyone to sign up. It's completely free!
Your name and player details such as club, county, country and DoB are often received along with your results so if any of those are wrong then it's likely that they are wrong on the source system and should be corrected there. Once those details are corrected, they will come over with new results and then they will be updated on SquashLevels.
An alernative is to correct your details directly on SquashLevels which can be done by clicking on the three dots at the top of your profile page which will take you to your player datails page. Here you can update any of your player details. You can also lock your details on SquashLevels so they are not updated by new results coming in which is a more permanent solution.
Note you can only update your own details this way. You need admin permissions to be able to update other players.
This is a common question as a very poor result can ding your level. There are limits to how much it can drop in one match but if you couldn't complete the match through injury it's probably not a fair representation of your level. This is a sensitive area because your opponent is equally effected and will lose out on what they probably think was a good result! For a result to be recorded as an injury at least one of the following must be true:
That way there is no arugument! This is a common request and quite often an apparently clear injury is recorded as such and then we receive a concerned email from the opponent.
League Master has a flag that can be set in the results form but that can only be set by the league secretary. Please get in touch with them to set that flag. The flag will then be uploaded to SquashLevels along with the results. Note this flag can be applied (or removed) at any time.
Badsquash has a flag that can be set by the team captain when entering the results. This can also be applied at any time.
Because the systems above upload the injury flag along with the results, any injury must be recorded on the respective system. If it is recorded soley on SquashLevels then the flag will be overwritten next time the result is uploaded and the injury record will be lost. The other league systems don't support the injury flag so please get in touch with us here and we can set it directly in SquashLevels. We will need to see evidence as required above.
If you're not logged in then go to the Log in/Join page and from there you will see a form to enter your email address for a link to reset your password. If you don't get the email and you've checked your junk folder then please get in touch with us anyway and we'll reset it from our end.
If you are logged in then you can reset your password directly from Me->My membership.
Some of the early results don't have IDs for the players so we had to do our best to match names and just initials in some cases. It's possible that some of these aren't right and that we've accidentally merged two players together. Please let us know if you come across a case like this and we'll separate the players again. It can all be sorted - we have the tools.
This is quite common when players change club and get re-added to their local league system. As a result, their subsequent results are entered against their new ID causing SquashLevels to treat them as a different player.
You should find that the system spots your 'other' player and asks you to let us know if you really are the same person via a form at the top of the player detail page but, even if not, please let us know and we'll merge the two sets of results. It can all be sorted - we have the tools.
Yes. The levels are recalculated from day one every night so if you change a result it will be taken account of in that process. Obviously if the result you changed was old, it won't have any effect on your current level as it's your most recent few matches that determine that.
It's possible that you have a duplicate 'self' on the system and that you're trying to edit your 'other' one. In this case, the system will think you're trying to edit someone else's results and won't let you.
Please check if you have a duplicate on the system and request a merge if so. Once the players are merged, the system will recognise them as you and allow you to edit any of the results.
If this isn't the reason you can't edit your own result then please get in touch and we'll find out what's wrong.
This is usually caused by the system having low confidence in your level and therefore purposely leaving you out of the rankings.
Your level confidence can be low because you only have a small number of matches in your history, you don't have recent results or you've had some unexected results. All these factors will reduce your level confidence and if that drops below 20% it is considered too low to include you in the listings by default.
You can tick the 'confidence' box on the listing page to show level confidence and also un-tick the 'limit by confidence' box to include you and other players with low level confidence on the listing page. Just be aware that players with low confidence levels may not be in the right place in the rankings.
The rankings normally show players who have played at or for your club (or region, country or whatever) at least once in the last six months. That keeps them nicely current. Unfortunately, due to COVID and no matches being played, that resulted in no-one being in the rankings at all! To allow for this and to keep some semblence of rankings, we gradually increased that period until it had reached two years!
Now that people are playing again, our rankings are a mixture of players who are active with recent results but also players who haven't played for anything up to two years. Quite a few of these have either moved clubs or stopped playing and shouldn't really be in the rankings anymore.
So... from the 14th November 2021, we're going to switch back to a period of six months and that's going to have a dramatic effect on the rankings - they will undoubtedly shrink quite a bit. If you haven't played for more than six months then you will be one of those people no longer listed!
It's easily fixed - just play a game and record the result and you will be included! Simples....
This is usually caused by the system having low confidence in your level but rather than leaving you out of the rankings, it puts you in your rightful position but grayed out. You'll notice that you don't occupy an actual position but you can see where you would be if you did.
Your level confidence can be low because you only have a small number of matches in your history, you don't have recent results or you've had some unexected results. All these factors will reduce your level confidence and if that drops below 20% it is considered too low to include you in the listings normally.
All the league and tournament results on SquashLevels are imported automatically from the various league systems so the best place to fix an incorrect result is on the local league system itself. Once corrected, that result will be re-sent to SquashLevels and all will be well.
To edit your result on SquashLevels, click on the match date in the player history and you will be taken to a page from which you can edit it. Note that; you must be logged on, you must be one of the players and the update will be recorded so we can track who is changing what.
Failing that, the result can be updated directly on SquashLevels either by us, by your county admin or by you (if you're registered as a member) but, beware, the incorrect result on the local league system could be re-sent and overwrite the corrected result at some point in the future.
SquashLevels is a multi-county system and part of its nightly processing is to calibrate the levels of players across counties. As the sources of results tend to be from one county at a time, the system looks for players who play in more than one county to help calibrate between them.
This comparison is made every night and if a county appears sightly high or slightly low then all of the players in that county are adjusted by anything up to 1%. This will happen over a period until the county as a whole is calibrated. This process is relatively new so you may find that your level is changing at the moment. Within a week or two it should settle.
SquashLevels is your social network for squash and you can comment on match results, win streaks, posts and many other types of block on the system. The goal is to give you a chance to recognise, congratulate or maybe have a bit a of banter with your fellow players.
In order to view and add comments:
Please be positive. We don't want to fall into the same trap as 'other social platforms'. This is a bit of fun and a chance for you to engage with your fellow players so let's keep it positive.
In order to keep it fun and safe we have given you full control over the content:
This is a new feature for SquashLevels and we want it to be fun and enjoyable. If you have any thoughts or feedback to please let us know.
The squash challenges are designed to be very straight forward. Each test is one minute long and requires you to either count the number of consecutive shots you can hit into the target area or the total number of shots that you hit into a target in the one minute time period.
On the More info page you will find specific instructions as well as an explainer video to guide you through the test.
You can use the built-in countdown timer which can be accessed by clicking the Take Test button or you can use a stopwatch and enter your results at a convenient time.
The beep test is available on the website. You may wish to use another version but please do ensure that it is the standard 20 minute test. Note it's two court lengths per beep! The other fitness tests require you to record your times with a stopwatch or tape measure and add your scores to the website.
Once you have recorded your result you will be able to see your scores in a chart. We have a lot of data relating to the squash testing and provide typical scores based on your level. Once you have done all ten squash tests we even work back and give you a derived, skills-based level you can compare with your actual level. You can play with the expected scores by using the level +/- buttons on the test overview page.
We'd love to include your league results in your history! If they're not already coming over then please ask your league organiser to put us in touch with the providers of your league system. The connection is very easy and can usually be done in a day if they're up for it.
Once the connection has been made your league results will be automatically pulled every night and your history will be kep up-to-date. Not just yours but everyone who plays in your league!
This applies to all your matches if they are recorded on an online system. Box matches, tournements, whatever. If you'd like your results on SquashLevels, just ask the system providers to get in touch and we can get them connected.
There aren't any filters on the search page but if you're searching from the rankings page then please check if you have filters set that would exclude the player you are looking for. Click on 'Reset filters' to make sure the filters are off and try again. If you still can't find a player then they are probably not on the system yet.
There a very large number of players on the system, nearly all added automatically as their results were received from a source league or tournament system. However, not all league and tournament systems feed results to SquashLevels so it's possible that some players have not been added.
If you would like a player and their results to be added to the system, the best bet is to ask the league or tournament organiser to ask their system provider to get in touch with us and we'll help them set up an automated feed quickly and easily. Feel free to copy us at email@example.com so we can follow up. Don't be left out of the fun!
If you have played a competitive match against the player, and they agree to have that match recorded, then you can record the result on the system yourself and add them that way.
Club boxes are automated but you'll need to start with a request to us to set one of your club members up as a club admin. The club admin can then set up the boxes and add all the players directly on the system. If you have a lot of players then we can also get you going if you give us a list of names.
We will provide a club-wide log-on to allow non-members to enter their own results (there is a charge for this - see the membership page) and then you're off and rolling.
Many systems on which competitive results are recorded (boxes, leagues, tournaments) have upload connections to SquashLevels and, in most cases, your results should be sent across automatically every night but there are still a few systems that don't have a connection. The first thing to check is if the system has upload to SquashLevels and you can find that out by asking the event organiser - they should know. If not, do please ask the organiser to ask the appropriate system provider to connect up and we will do our best to make it easy.
Another posibility is the results have been missed by the source system if, say, they are old results being back-filled/updated. Most systems will send old/updated results through but not all. In this case, please get in touch and we'll have a look. We can always pull historic results using special feeds on request.
SquashLevels will not accept 'duff' results such as 15-0, 15-0, 15-0 (they cause havoc with the rankings) or dates set in the future so please also check that the result is sensible.
We keep a history of the results upload from all source systems so should be able to find out why a result hasn't made it over.
In general, matches can only be deleted if they were entered by hand and the person doing the deleting is one of the players. The most common reason your match has been deleted is that you played a friendly, had a good result and entered it into SquashLevesl without agreeing to do so with your opponent. You have to remember that a good result for you is likely to be a bad result for them and they will get an email saying they have a new match result so they'll see it straight away!
The next most common reason for deleting matches is that the system thought it was a duplicated or an updated match. A duplicate match is same players, same date, same result, an updated match is the same but maybe one change such as a different result. Either way, the earlier of the two matches is auto-deleted leaving the the more recently one as the 'official' result.
And finally, it's worth knowing that admins can also delete results but that's very rare.
Yes. Just register as a member and you'll be able to add 'Club matches' against anyone in your club. You can even add club members if they are not already on the system.
You can, but better if you don't. SquashLevels is a results based system that assesses how well you're playing based on your results and the level of your opponents. If you play a friendly then it's likely you won't be playing a truly competitive match and your level will get dinged. We do allow a range for the better player to play in but if you drop games to someone half your level then you're going to be going down... and, equally bad, your opponents wil be going artificially up.
We will add a future feature to allow you to enter your results but exclude them from the level calculations (that's really intended for dealing with injuries) but that's not available yet. Watch this space on that one.
You can't add them personally as you are restricted to entering club challenges even as a member.
There is also an issue that if you add your results from a single event then all your opponents suddenly see a single result for the whole event when they know they played three of four matches. That's confusing and usually results in them emailing us. It's particularly unfair if that single result wasn't a good one for them and it causes their level to go down - very annoying if that's your only bad match in the whole tournament yet that's the one on the system. This is what normally happens when one player, who had a great tournament, enters just their own results!
So the rule is they either all go in or none of them go in.
It's possible that the results can still go in even if they're not already there. It somewhat depends what system it was run on. If you can find out then please let us know and we may be able to connect with the system developer. Not really feasible if it was run on Excel or bits of paper though.
Having said that, if someone is prepared to hand enter all the results then we can support that and give then the appropriate admin level to do so.
As a normal user, you can't enter the results for other players but, if you're willing and able to enter the results for a whole tournament then we can make you an admin for a while and that will allow you to enter them.
First of all tell us when the tournament is and who is entering. That will let us know the scope of the players to be selected - could be club, county, organisation or whatever. We will then set your admin to the right level to match that scope.
Once you are an admin, you can enter your results using the normal result entry page except you will find you now have a couple more fields to fill in.
Once you've added your first result you can then add another one (with an extra button!) and that will go back round again and pre-populate the repeated fields - match type, date and time. This makes it much easier to enter a lot of results.
It only takes about 30s to enter a result and it's much easier if you enter them as you go. That will then allow your players to see what's happened to their level throughout the event and that adds quite a lot of extra interest.
If you're doing that then you might also be interested in our 'Most improved' tournament screen intended for use on a big screen on the wall visible to everyone at the event. This shows the current most improved player over the course of the event (as a leaderboard) and also the best result. This is a great addition to the event as anyone can win it - not the usual suspects. If you're interested in this, do please get in touch.
Some of the league systems rely on manual results entry and it's not always a set of scores that SquashLevels can interpret. This sort of thing is not uncommon: 9-5,9-69-4 for instance. It could be argued that this sort of result could be pulled apart but, for now, we check for pairs of numbers that are within reasonable limits. This example will fail this check so can't be used.
If you can correct the score entry on your league system then it will be re-sent to SquashLevels and all will be well.
It's important to remember that the level calculated by SquashLevels is an assessment of how well you're playing at the moment and that is based on your results and the level of the person you played. If you're better than your opponent then you're expected to win so the big question is not 'did you win?' but how did your result compare with what was expected? If you didn't do as well then your level will go down - at least a little.
It's similar to asking your teammates on the balcony how well you played. You may well have won the game but they will know if you made a bit of a meal of it...
This is important as it rewards effort. You can nearly always get a level reward for putting the effort in and doing better than expected. This is perfect for juniors as there's always something to go for whoever you're up against. You might be expected to lose but you can still improve your level and that's something to go for.
There is some leeway for players that have quite different levels because we don't expect a much better player to hammer their lowly opponent just to keep their ranking up. In this case, the system assumes there's a range that the better player might play at and only if the result falls outside the range will either player's level be changed.
We do receive suggestions that winners should be rewarded for winning and they certainly shouldn't take a drop in level which is similar to the classic tournament systems. In this case players are awarded points for every round won, usually doubling each round, and the guys that win the tournaments get vast numbers of points. That all sounds fine but if you don't play many tournaments or you keep getting seeded against better players and get knocked out too early then your points tally isn't going to be representative and you'll be stuck way down the rankings - and that can be hard to get out of as it tends to self-perpetuate given the way seedings are done. This is a very common problem with tournament based rankings.
And what if you don't play tournaments? How would you treat a win in the boxes compared to a win in the league for instance? What if you always have easy league games? Systems that give a win bonus cause the better players to want to play further down the team order to seal that bonus. That's not the kind of behaviour we want to promote.
Using levels and estimating your actual playing level reasonably accurately based on both the games score and the points score is what makes the system accurate, inclusive and relatively independent of the match you are playing and where you are seeded in the team. If we were to give bonuses for winning it would skew the levels and the rankings would quickly become inaccurate and, worse still, change player behaviour out in the leagues.
Another problem is that if you increase the level of one player without reducing the level of their opponent then the average level of that match - and therefore the entire system - goes up over time which means you can't compare a player's level over time. This already happens to some extent due to the behavioural modelling and there are other factors taken into account and so the average has to be pulled back somehow, very gradually, over time. It's a complex part of the algorithm but it's essential that there isn't net gain or net loss across the system.
The system takes everything it needs from the results that come in and if you have changed your name (say you got married or maybe just wanted a new name) and your new name is now being used in your new results then you'll probably find you have a new player profile and your account is still pointing to your old one. This is normal and can be corrected!
The first thing to check is that the name you want to use going forward is being used by the system sending your current results. If not, please ask them to get that sorted first or future results will come in with the wrong name.
With that sorted, you can go back into your old profile and change your old name to your new one. You can do this because this is the profile linked to your account. It's a good idea to check the 'lock' box to make sure it doesn't get overwritten in case your name is still not spelled exactly right.
Now look at your old profile again and you should see your new profile offered as a duplicate. It's based on name and level so it should find you. Simply send us a 'yes' to indicate this is a duplicate and we will set your two profiles to merge at the end of the night - just before the nightly processing.
The reason you end up with a new profile, even if the system sending the results over is reusing your ID is because we have to check that IDs are not being re-used by different players and a significant name change is what we're checking for. Changing your surname is a big enough change to trigger this. Correcting your spelling usually isn't.
The system updates player information based on the results that come in. For instance if you play in the Yorkshire leagues for Barnsley it will update your information for both county and club. This will mean you appear under the Yorkshire and Barnsley player listings.
If, however, you are affiliated to a different county and only want to be listed as a player for that county (for the county rankings) then you can ask your county admin to lock your county so that it isn't updated by new results.
It obviously has your name, match results and a calculated level and it has that for everyone on the system. If you register as a member then we also ask for an email address and for you to identify which player on the system you are. That's it. Your password is encrypted before it's put into the database so we have no idea what it is. We also don't send emails out unless we have a query specifically related to you.
There's no personal information, anything to track you with and no advertising or marketing use for them.
We get results from many different source systems so if you have results on one of those we can't really stop them coming across. Also, as your matches are also your opponents' matches they get confused if their results aren't visible and we then receive questions we have to answer which defeats the object of not wanting to be shown in the first place... It just highlights it!
What we can do is make you disappear so your name and your history are unavailable to anyone on the site. You will not show up in any searches or rankings and your profile will not be visible. If you are registered you can still find your profile but your name will be replaced with 'Name Withheld'. Most importantly, you will not appear in any Google searches once anything they have cached for you expires which usually doesn't take long.
Another important reason for keeping hold of your data is because, even though it's not visible, we maintain mappings from the source system IDs to SquashLevels IDs. This means that new results coming in will be added to your hidden profile and they will be hidden too. If we delete your data - and therefore your mappings - then the system doesn't know who you are and will create a new, visible, profile for you and you'll be back where you started!
Please note that the data on the system is harmless - nothing personal is shown - and it's only a repeat of what is already shown on the source league systems (apart from your level history) but we respect your right to not have your name displayed on the internet and can make you disappear very quickly. You don't have to tell us why.
Of course, if you continue to play and have your results recorded on source league or tournament systems your name and results will still be visible on them. You may need to get in touch with those providers to be removed from those as well - though that is genuinely impractical on these systems as the results need to be posted to run the league/event.
The player of the month is awarded to the player with the greatest improvement in their level compared to the start of the month. We cover two months; most improved over the whole of last month and also most improved so far this month.
The system records the level at the start of each month for every player during the nightly processing so updates can be delayed by up to 24 hours. There are also two entry criteria for a player to be eligible:
We offer a most improved ranking for both your club and your county (links in your footer) and also show most improved winners in your feed and your communities. Glory indeed!
Use wall mode to set your tablet or PC up so that you can hang it on the wall at your club for instant results entry and easy viewing of the boxes.
For PCs, it's best if the browser is running in 'kiosk' mode or, for a tablet, running from within a 'kiosk' app. The kiosk mode/app locks down the device so users can't use it as a general purpose browser. Wall mode helps by disabling external links from this site and preventing the generic box user from logging out. If there's no user interaction within the timeout period set in the box configuration, the boxes page is returned to automatically.
To enable wall mode you must be an admin. Log on as normal and then navigate to your boxes page where you will see the 'enable wall mode' button which will turn wall mode on. It sets a cookie on the device you are using - i.e. the one hanging on the wall. Once wall mode is enabled, log out and then back in again as the generic user we set up for you.
Since it's not possible to leave wall mode from the wall mode device, you can only disable it by zeroing out the timeout in the configuration from another device as an admin. Note that if the timeout is set to zero, the 'Wall mode' button will not be shown. The default timeout is 60 seconds.
There are ten skills tests that each test an area of racket skills that, between them, give quite good coverage of the skills needed in normal match play.
Based on the testing data from hundreds of players of varying level, we have been able to correlate between a player's level and the score they should expect to get for each test - and also from the test score they get back to their likey level.
We have been able to scale and map each test score such that we can combine them and work back to a derived, technical level and that it what we show on the testing page once you have completed all ten skills tests.
It's likely that your dirived level is not the same as your actual level but it's also likely that it's not too far off. The differences are likely to be related to your strength and fitness and also your mental approach to the game but having a derived technical level is an interesting measure in itself.
For all of your tests, you will have an expected score based on your level. A good starting point is to identify those tests where your actual score is lower than your expected score as those are likely to be good areas for you to work on. If you have better skills, you'll have better results!
In order to qualify for the ES discount you need to be an activated member of England Squash.
The first part of this is ES membership. You can either become a member through your club, if it is affiliated, or you can join directly via the ES website. It's a little cheaper through your club so worth asking them first. Once you are a member you will keep that membership for the full year, even if you change clubs.
To join England Squash direct, click here to visit their player membership page. Here you can also see the other benefits of ES membership.
The second part is the activation of your ES account. To do this you need to log on to the ES website and provide your contact details. This is usually only needed if you join via a club as you will already have entered the information needed if you joined direct.
To activate your account, note your log-in details from your ES registration and log-on here You should be guided to complete your details and activate your account.
You can see the status of your ES number at the top of your profile page. You should see something like ES0123456-A in your player summary. In this case the -A shows that your ES number is activiated. If it shows -V then the number is valid but not activated whereas -X is expired and -I is invalid.
Once you have activated your ES memberhsip you will automatically qualify for either free SquashLevels England membership or for a significant discount off SquashLevels Gold and Platinum membership. For that, you will need to register on SquashLevels (for free) and then add your ES number to your player data if it's not already there. Use the three dots at the top of your profile page to get to your player admin page where you can add your ES number as well as update your other player details.
Note that the system checks your name and number over the ES API so if you're sure your number is valid but it's still showing invalid then please check that your name on SquashLevels is the same as the name ES have recorded for you.
See the section below to find out how your ES number may already be associated with your player details.
Many of the England Squash supported systems include your ES membership number along with your results and that is picked up and added to your profile information as your results come in.
If your ES membership number is wrong then you can correct it along with your other player details by clicking on the three dots near the top of your profile page which will take you to your player admin page. If you have had to correct your ES number it's probably a good idea to also lock it so it doesn't update as future results come in. It would also be a good idea to have your ES number corrected on the system providing the results.
Unfortunately, we don't have a formal link with Club Locker at the moment and the manual effort required by ES staff to generate the data in the format needed is prohibitive. We have received results intermittently in the past but this is going to be increasingly difficult going forward. At the moment we don't have a solution to this.
England Squash don't have visibilty of the value of this feed to the juniors and parents so, if you feel strongly that this feed should be set up more formally, then do please get in touch with them and let them know your thoughts.
In order to qualify for the Welsh Squash discount you need to play in the Welsh leagues and be Welsh!
There are entry requirements to join the leagues requiring a Wales Squash ID. Please contact the league organiser for more details.
In order to qualify for the Swedish Squash discount you need to be a member of Swedish Squash and we need to have you on our list of Swedish Squash players which is sent to us by your federation. If you are a member of Swedish Squash but are not being offered the discount, please ask your federation to update us with your details.
From the player's history page you should see an edit button at the top. From the edit page you can change those player details based on your admin level. If you need to change a detail that appears to be unchangeable then please contact us. We can change the information or bump your admin level up so that you can do it yourself.
The system does its best to work out a player's starting level based on their first match and then, afterwards, may adjust it if it doesn't look right. In most cases, you can leave the system to do its thing but that can take time and that's no good if players are in the wrong place in the rankings and that's causing trouble.
A player's starting level is included as part of their details and you can edit it on the same page. See above section on how to edit a player's details. You may have to scroll down to find the starting level field. Also note that you can change it but you can also set it 'manually' such that the system won't come back and change it again.
If the player has played a few matches then the starting level is less significant to their current level. This is only really useful to do if the player is new to the system and their first match wasn't representative.
Whenever you see a date for a match, you'll find that is also a link to the match detail page. From the match detail page, if you have admin rights, you will see a button to edit the match. The button will indicate what level of admin rights you have.
Within the edit match page you will be able to edit the match details based on your admin level. If you are unable to edit the details you need then you may not have the right admin level. In this case please get in touch with us and either we can make the changes for you or we'll bump up your admin level so you can make the changes yourself.
As an admin, there are several ways to actively find duplicate players.
This is something we need to do from our end but we need your help to identify them so please let us know if you're aware of duplicate clubs or mispelled clubs. Note there are a few clubs that are the same but appear in different counties. For now we're keeping those separate so they show up correctly in the rankings. At some point we'll work out a clever way of combining them!
Quite a few of the source systems also supply ES membership numbers with the results during the updates each night and these can be viewed either in the player's history page or by selecting the check box 'ES numbers' at the top of the rankings pages. Note that only the appropriate admins can see a player's ES membership number.
The system checks the membership number against the ES database so can tell if the number is valid, invalid or expired. It only does this when needed (when the pages are viewed) and only does it once per week maximum to reduce the number of accesses to the ES database.
Very useful for checking if your league players are members of ES - which they should be.